Hardware Specs for a Golden West Pool Table
9/14/2025 12:57:41 PM
Hardware Specs for a Golden West Pool Table
Greetings from Cairo, Egypt.
I recently bought a wreck of a Golden West pool table imported to Egypt from the USA, and I'm trying to restore it.
It's a 8.5-foot Golden West Billiards pool table, with three slate panels.
I mainly bought it for the slate, which is rare here (marble is commonly used, or granite). I'm having the liners fixed, and a few small repairs done to the rails and side panels.
This is the first pool table I have attempted to assemble, though I'm 53 and have played snooker and pool since I was 5 years old.
But the main problem I face is that the pool table came with no hardware, fasteners, or fittings, at all.
I think what is needed is probably standard, but I need help to know the right slate screws to use, the right liner screws to use, the right rail bolts to use, and any other info that would be useful.
I want to bring this pool table back to life, but also do it properly, so it can be dismantled and moved in the future.
Any help would be much appreciated.
Some images attached below. I don't have a good image of the fully assembled pool table.
immanenceThis question mentions the following businesses:
Hardware Specs for a Golden West Pool Table
Replies & Comments
billiardsforum on 4/23/2026 9:53:47 AMA little late to reply, but your best course of action is to reach out to Golden West Billiards directly.
With any luck, you'll be able to order a hardware kit from them, or at least get some specs for the missing hardware.
Hardware Specs for a Golden West Pool Table
- Title: Hardware Specs for a Golden West Pool Table
- Author: immanence (Ian Douglas)
- Published: 9/14/2025 12:57:41 PM
- Last Updated: 4/23/2026 9:50:39 AM
- Last Updated By: billiardsforum (Billiards Forum)
