Info on Possible Montgomery Ward's Pool Table

---

3/9/2018 12:28:50 AM

Info on Possible Montgomery Ward's Pool Table

Need information on this pool table, including the brand, model, year of manufacture, and estimated value, etc.

I believe might be a Montgomery Ward pool table but there is no nameplate or any identification on it.

• Pool Table Identification
• Pool Tables

Info on Possible Montgomery Ward's Pool Table

Replies & Comments

---

1. billiardsforum on 3/14/2018 11:07:24 PM

   You should get underneath the pool table with a flashlight and look for identifiers. If it IS a Montgomery Ward pool table it will likely have some markings as shown in the post 1973 Montgomery Ward Pool Table. If you find anything, post it here. Otherwise it's hard to tell for sure.

   As for value, they aren't worth anything.

2. Mr. B on 3/19/2018 1:06:41 AM

   It might be a MW table however it was built by Fredrick-Willys out of Minnesota. You can tell by the corner casting and the leg design. I used to sell the Fredrick-Willys tables in the early 70's and installed many of them. Hope this helps.

3. billiardsforum on 3/20/2018 6:51:47 AM

   @Mr. B - I didn't realize Frederick Willys, Inc. made pool tables for Montgomery Wards, but now that you said it, I can totally see it.

   I can't believe I didn't put together the connection before now. Thanks!

Info on Possible Montgomery Ward's Pool Table

• Title: Info on Possible Montgomery Ward's Pool Table
• Author: user1520573328 (Crüe Neck)
• Published: 3/9/2018 12:28:50 AM
• Last Updated: 3/14/2018 11:00:27 PM
• Last Updated By: billiardsforum (Billiards Forum)