Here's a collage showing the pair of custom 21st Century #6 cues side-by-side:
Info on the Meucci 21-6 Cue with Custom Ringwork from Meucci
The New Meucci 21st Century cue #6 is a trophy to the innovations of Bob Meucci.
The Meucci 21-6 cue forearm consists of cocobolo with a multiple-material band around the middle made of white plastic with twenty-four green veneer 1/16th x 1/16th squares top and bottom, and set in a white background surrounded by four aluminum rings.
Three white points pass under the band, and three unique diamond shapes pass over the same band in between. The three white points are then set off with a beautiful scrimshaw design. In the center of the band, in between the unique triangles, there are three smaller green pearl diamonds surrounded by aluminum. All of this is set off with 24 green veneer inlays at the joint surrounded by ivory, black, and aluminum rings.
The wrap is a urethane-coated cream Irish linen.
It comes with the Everlock adjustable weight bolt system. There will be a $20.00 upcharge for any cue exceeding 20oz.
Meucci 21-6 Cue with Custom Ringwork Specs
Black rubber bumper. Push-in style.
Cream/white-colored composite material, with a condensed Meucci logo engraved in black lettering. All current Meucci 21-6 cues have the Meucci logo on this white butt plate portion (whereas the earliest versions had a water slide decal logo on the cocobolo butt sleeve ).
Cocobolo wood with white green and silver veneer diamonds. This custom 21-6 has an additional band of rings separating the butt sleeve from the butt cap. No Meucci logo exists on the butt sleeve in this version of the Meucci 21-6 cue. (Some early 21-6 cues have the black Meucci logo on the butt sleeve)
60 inches. 30" cue + 30" shaft.
18 Characters on 2 Lines in Buttsleeve, in either block or script lettering is available as a custom option.
1" Polycarbonate Ferrule
Cocobolo wood with white green and silver veneer diamonds and 3 white points with black scrimshaw design.
Joint Pin Size:
5/16x18. 3/8x10 joint pins are also available as a custom option.
Flat-faced, "wood to wood" joint.
Condensed-size black "Meucci" logo engraved on the white butt plate area.
1 year against manufacturing defects and material flaws.
Number of Points:
3 point cue (and a one-off Meucci 21-6 exists with 6 points)
Mass Production Cue (customized).
Only one custom 21-6 cue with the extra ring-work at the edges of the wrap. It is not known if any additional cues like this one have or will be made.
This Meucci 21-6 cue features the standard ringwork consisting of 24 green veneer inlays at the joint surrounded by ivory, black, and aluminum rings. In addition to this, three more instances of the same rings exist at each end of the wrap (at the top of the butt-sleeve and the bottom of the forearm) as well as near the butt cap. This is the main customization for this particular custom 21-6 cue.
This custom Meucci 21-6 cue was ordered with two matching 30" Meucci The PRO shafts with brass inserts.
Five-proof urethane coating, including the wrap.
18oz to 21oz, in 0.5oz increments. Weight is changable/adjustable as it comes with the Meucci Everlock adjustable weight bolt system.
Meucci Cues Factory in Byhalia, MS (United States)
White Irish Linen, urethane coated/lacquered. Custom options available.
No product valuation data availale for the Meucci 21-6 Cue with Custom Ringwork
Meucci 21-6 Cue with Custom Ringwork Identifiers
Officially, the Meucci 21-6 Cue with Custom Ringwork model number is ME2106-CUSTOM-RINGS, but it may be seen in the wild listed as any one of the following model numbers or model names: