Product Line Name: BMC Angel, aka BMC Angel Pro Series
Product Line Full Name: Bob Meucci Customs BMC Angel Pro Series Cues by BMC Cues
Common Abbreviation: BMC "BMC Angel" Line
Production Date(s): The BMC Angel 1 Bull Leather Pool Cue was first made around 2017-01-01 and they are still being made today.
Line Exclusive to: Cue and Barrel
Detailed close-up photo of the BMC Angel 1 Bull Leather from the Angel line of pool cues.
More Pictures of BMC Angel 1 Bull Leather Pool Cue
BMC Angel Pro 1 Bull Leather Pool Cue Pictures
Bob Meucci Customs BMC Angel 1 with a bull leather wrap. Made by BMC cues exclusively for Cue and Barrel out of Auburn, KY.
BMC Angel 1 Cue with Bull Leather Wrap
A BMC Angel 1 pool cue with a bull leather pool cue wrap by Bob Meucci Customs. This cue was made for Cue and Barrel in KY in 2017.
BMC Angel 1 Bull Leather Pool Cue Info
Info on the BMC Angel 1 Bull Leather Pool Cue from Cue and Barrel
New exclusive Meucci Pro Series hand made just for us! This is the top dog right here! Super high performance, extra low deflection, power piston pool cue.
This is a sweet 6-point rosewood and golden maple beauty. Bob says this is the only 6 point cue he has ever produced.
$1,325 MSRP BMC Angel 1 model is going to be called the BMC "Angel-1" pool cue with Bull Leather Wrap.
This cue can be ordered for you with an exposed wrap area or with a black bull leather wrap.
This cue is good and straight in every way and is absolutely gorgeous! It would be a wonderful addition to any collection or great to be played and enjoyed! Look at how pretty this cue really is... so, so pretty! It is absolutely one of the most beautiful cues we've ever had the opportunity of selling!
How it plays:
Softer more consistent hit
Highly reduced cue ball deflection
The Angel-1 pool cue with black bull leather wrap features a G10 joint pin for exceptional feel and perfect balanced further back than any cue you've ever held.
BMC Angel 1 Bull Leather Pool Cue Specs
Basic push-in style black rubber bumper
Meucci-style white synthetic butt cap
Stained golden maple with 6 large diamond-shaped rosewood inlays, each with a slotted diamond inlay within it.
1 inch polycarbonate high performance extra low deflection ferrule.
The forearm features high performance Pro Series technology using rosewood and golden maple with 6 points, each containing a slotted diamond inlay.
The handle is made from maple dowel and meant to be covered by the wrap.
Meucci-style white synthetic joint collars.
Joint Pin Size:
Joint Pin Type:
Black G10 Joint Pin
Flat-faced wood-to-wood joint.
Black "BMC" logo
A black "BMC" logo is located on the butt cap
The BMC Angel-1 Bull Leather cue is guaranteed for 1 year against construction defects not related to warpage or abuse.
Number of Points:
Mass Production Cue.
Unknown. Some are pre-made, and some made-to-order.
5 sets of three rings. Each set contains a thin silver stainless steel ring sandwiched by thicker black composite rings. One set at the butt cap, two bordering the wrap area, one at the forearm joint collar, and one on the shaft joint collar.
Extra low deflection Meucci Pro Series high performance hard rock maple with perfect heavier taper for pro & semi-pro pool players that plays perfectly in all positions.
Five-proof urethane coating
Ultra Skins black layered soft tip
Meucci Factory in Byhalia, MS
Black bull leather wrap. Comes standard with black bull leather but you can request an exposed wrap area e.g. no wrap on custom requests.
BMC Angel 1 Bull Leather Pool Cue Value
Use this data below as a general guide to value and find out how much a BMC Angel 1 Bull Leather Pool Cue is worth. All priced in USD.
BMC Angel 1 Bull Leather Pool Cue MSRP
Listings showing BMC's MSRP for the BMC Angel 1 Bull Leather Pool Cue over time.